Liebherr 7082-499-00 manual Interior light, Equipment, Removing the shelves, BioFresh drawer

Interior light

The interior light is located at the left, right and top in the refrigerator compartment and above each drawer in the freezer compartment. It comes on if one of the doors or a freezer drawer is opened.

Caution - class 1M laser radiation. When cover is removed, do not look directly at light through optical instruments. Severe eye injury can occur.

The light switches off automatically if one of the doors or a freezer drawer has been left open for more than 15 minutes. The audible warning signal sounds at the same time.

If one of the strip lights is not lit, it is defective.

The lighting may only be replaced by the customer service technician or by competent skilled personnel!

Do not try to change the defective lighting yourself!

Removing the shelves

1. Follow the first three steps in the chapter above.

2. Move the shelf down and stop just over the vegetable drawer.

3. Move the front of the shelf upwards until the shelf is in a vertical position.

4. Turn the shelf by 90° and remove.

BioFresh drawer

Pull the drawer straight out, grip at the back and lift out.

Inserting the BioFresh drawer

Place the drawer on the pull- out rails. The rails must be fully extended and aligned with the front of the drawer. Slide the drawer in.

Bottle shelf

The shelf above the BioFresh drawers can be used for stor- ing bottles horizontally.

Remove the glass plate and insert it under the shelf plate.

Equipment

Repositioning the door racks Lift door rack vertically, lift out to the front and re-insert at a different height, following these steps in the reverse order.

Repositioning the shelves		Light cover
1.	Hold the shelf underneath
	with your hand to prevent
	from tipping down back-
	wards when removing.
2.	Lift the shelf at the front.
3.	Pull the shelf towards you
	until the round cutout of
	the shelf is in line with the
	interior light cover.

4.Lift the shelf up and replace in the desired position.

The recesses in the shelf plate ensure that the bottles are stored securely.

When storing tall bottles, the bottom door rack must be moved further up.

20