Troubleshooting
Customer service and type plate
If none of the above causes apply and you cannot
rectify the fault yourself, or if the temperature display reads "F 1 " to " F 5", this means that there is a fault. Please contact your nearest customer service department (see enclosed list for addresses). Give the fault number dis- played, together with the
type designation 1, service number 2 and appliance number 3
as given on the type plate, fig. A2, so as to ensure rapid, ac- curate servicing. The type plate is located inside the freezer compartment on the
Leave the appliance shut until the customer service engi-
neer arrives soas to prevent any further cold loss.
Net@Home
Depending on the model and equipment, your appliance may have an additional interface to which you can connect an optional information module.
You can choose between a TeleSafe module and a com- munication module. The modules are available from your dealer.
If your appliance has this interface 1, it will be located at the back of the appliance near the top.
1
TeleSafe
The TeleSafe module informs you immediately if your appli- ance develops a fault.
In the event of a temperature alarm or another fault display (F1 to F5), the appliance status is immediately forwarded to the alarm contact.
The alarm contact can be connected to any of the following processing units:
A- a telephone system with an appropriate signal input, B - an
unit.
In the event of an alarm a programmable number is dialled and a recorded message is played back.
Communication module
The communication module enables you to integrate your appliance into a home network (EHS Powerline).
You can then
-operate all the functions of the appliance or
-display the status of the appliance (e.g. door open alarm, current refrigerator/freezer temperature)
remotely using a remote control.
For more information, please contact your dealer or see the installation instructions for the module in question.
20
GNP..6
