Liebherr 7084 750-00 Ventilation, Audible warning signal, Additional functions, Exit set-up mode

Ventilation

Thereby a climate which corresponds to that of a wine cellar is achieved inside the wine cooler. Corks are prevented from dry- ing out due to an increased level of humidity.

To switch on: Press the button and button

until symbol appears on the display.

To switch off: Press the button and button

until symbol disappears on the display.

Audible warning signal

The audible warning signal helps to protect your wine againts excessive temperature fluctuations.

•It sound when the door has been left open for longer than about 60 seconds. The audible warning device is switched off by pressing the Alarm button.

•It sound when the interior gets too warm or too cold. The temperature display will also flash. The audible warning device is switched off by presssing the Alarm button. The tem- perature diaplay will continue to flash until the cause of the alarm has been rectified.

Additional functions

In set-up mode you can set the child-proof lock and adjust the brightness of the display. The child-proof lock is designed to protect the appliance from being switched off accidentally by children.

Activating set-up mode :

•Press Ventilation button for approx. 5 secs - the Ventilation on/off button flashes

-the display shows c for child-proof lock. Note : the value to be altered flashes.

•Select the required function by pressing the Up/Down but- ton :

c = child-proof lock, h = brightness of the display.

•Now select /acknowledge function by pressing Ventilation on/off button briefly

:

• For c = chold-proof lock,

press the Up/Down button to select c1 = child-proof lock on or

c0 = child-proof lock off and acknowledge with the Ventilation

button. When the symbol is lit, the child-proof lock is activated.

• for h = brightness, press Up/Down button to select

h1 = minimum to

h5 = maximum brightness and acknowledge with Ventilation on/off button.

Exit set-up mode :

•Exit the set-up mode by pressing the On/Off button; after 2 min. the electronic system switches over automatically. The normal operating mode is activated again.

6