Liebherr 7084 750-00 manual Labels, Air exchange with activated carbon filter, Defrosting, Cleaning

Models: 7084 750-00

1 10
Download 10 pages 35.94 Kb
Page 7
Image 7
Equipment

Equipment

Labels

The appliance is supplied with a label holder with labels for each shelf. Use these to label the type of wine stored on each shelf. Addi- tional labels can be obtained from your dealer.

Installation : Clip the label holder

into place and slide the label in from the side.

Air exchange with activated carbon filter.

The way in which wines continue to mature depends on the ambient conditions. The quality of the air is therefore decisive for preserving the wine. An activated carbon filter has been fit- ted in the lower area of the rear wall of the appliance to ensure that the air throughput remains at an optimum quality.

We recommend that you replace the filter once a year. Filter can be obtained from your

dealer.

Changing the filter : Take the filter by the handle. Turn it 90o to the left or right and remove.

Inserting the filter ; Insert with the handle in a vertical posi- tion. Turn it 90o to the left or right until it clips into place.

Defrosting

The appliance defrosts automatically. The water that forms on the rear wall drains into a reservoir at the back of the appliance and evaporates automatically through the compressor heat.

Cleaning

Before cleaning always switch off the appliance. Pull out the mains plug.

Never use abrasive or acidic cleaning agents or chemical solvents.We recommend the use of an all-purpose cleaner with neutral pH.

Do not use steam cleaners because of the risk of injury and damage.

Do not use abrasive sponges or scourers, do not use con- centrated cleaning agents and these would damage the surfaces and could cause corrosion.

Use a glass cleaner to clean the glass surfaces and com- mercially available stainless-steel cleaning agent for the stainless-steel surfaces.

Clean the inside and equipment with lukewarm water and little detergent, with the exception of the wooden trims on the grid shelves.

Ensure that no cleaning water penetrate into the electrical components.

Dry all parts well with a cloth.

Do not remove the type plate from the inside of the appli- ance; it is important for after-sales servicing.

7

Page 7
Image 7
Liebherr 7084 750-00 manual Labels, Air exchange with activated carbon filter, Defrosting, Cleaning, Equipment