
REVERSING DOOR HINGES
6.Figure 5: Unscrew the lower hinge (13).
-Remove the washer, stops and bushing (14, 7, 8).
-Remove screw (Q).
-Transfer hinge pin (2) to the opposite side.
-Transfer screw (Q) to the opposite side.
-Turn the stop (7) through 180° and position bushing (8) and washer as shown in the detailed drawing. The flat side of the stop must face forwards.
-Screw on hinge (13) on the new hinge side.
7.Install the door fittings as shown in Figure 5. Insert the plugs (X) as shown in the detailed drawing. Move plug (W) to the opposite side of the lower door.
8.Unscrew the center hinge (10) and cover (11), pull them off to the side and after turning them through 180°, slide them on again on the opposite side and secure them.
9.Place the lower door on the hinge pin (2) at the bottom.
-Swivel in the door.
-Pay special attention to the bushing (12) in the center hinge (10).
-Insert the hinge pin (9).
Figure 5
A delight in freshness
10 | WF1051 / EWTNes 2956 |