Life Fitness 4000 How To... ADJUST AND TENSION THE STRIDING BELT (Continued)

Life Fitness Model 4000 Treadmill

How To... ADJUST AND TENSION THE STRIDING BELT (Continued)

Tools Required: Hex key wrench set, phillips screwdriver

It is EXTREMELY important that the treadmill be correctly leveled prior to any tracking adjustments.

An unstable unit may cause Striding Belt misalignment.

Step 1

Locate the two belt TENSIONING BOLTS on each side of the REAR ROLLER MOUNTING BRACKETS. The

TENSIONING BOLTS are accessible from the holes provided in the ENDCAPS.

Step 2

Enter the Manual program and set the belt speed to run at 4.0 mph.

CAUTION: DO NOT OVER TIGHTEN THE TENSIONING BOLTS WHILE MAKING BELT ADJUSTMENTS.

OVER TIGHTENING OF BOLTS MAY OVER STRETCH AND DAMAGE THE STRIDING BELT AS WELL AS

PLACE AN UNNECESSARY LOAD ON THE REAR ROLLER BEARINGS.

Continued

Life Fitness Model 4000 Treadmill

CAUTION: DO NOT MOVE OR PLACE YOUR HANDS UNDER THE UNIT WHILE THE MACHINE IS

PLUGGED INTO AN ELECTRICAL OUTLET.

NOTE: EACH ADJUSTMENT MADE TO ONE SIDE OF THE REAR ROLLER MUST BE MET WITH AN

EQUAL AND OPPOSITE ADJUSTMENT TO THE OTHER SIDE OF THE REAR ROLLER TO

MAINTAIN AN IDEAL BELT TENSION AT THE PIVOT POINT.

If the STRIDING BELT has moved to the right,

turn the right TENSION BOLT 1/4 turn clock-wise

and the left TENSION BOLT 1/4 turn counter-

clockwise to start the STRIDING BELT tracking

back to the center of the REAR ROLLER.

If the STRIDING BELT has moved to the left, turn

the left TENSION BOLT 1/4 turn clock-wise and the

right TENSION BOLT 1/4 turn counter-clockwise to

start the STRIDING BELT tracking back to the

center of the REAR ROLLER.