Life Fitness 4000 How To... ADJUST AND TENSION THE STRIDING BELT (Continued)

How To... ADJUST AND TENSION THE STRIDING BELT (Continued)

Tools Required: Hex key wrench set, phillips screwdriver

Step 3

Repeat adjustments until the STRIDING BELT appears centered. Allow the machine to continue running for

several minutes to observe if the tracking remains stabilized.

It is EXTREMELY important that the treadmill be correctly leveled prior to any tracking adjustments.

An unstable unit may cause Striding Belt misalignment.

Step 1

Locate the two BELT TENSIONING BOLTS on each side of the REAR ROLLER MOUNTING BRACKETS. The

TENSIONING BOLTS are accessible from the holes provided in the ENDCAPS.

Step 2

Enter the Manual program and run unit for five minutes at 5.0 mph.DO NOT run on the BELT.

Step 3

Using the speed decrease button ∇, bring the STRIDING BELT speed down to 2 mph. With the STRIDING BELT

speed at 2 mph., tightly grasp the HANDRAILS and attempt to stall the STRIDING BELT. If the STRIDING BELT

slips, continue to Step 4. if it does not slip, the tension is correct.

Step 4

Stop the treadmill and alternately turn the STRIDING BELT TENSIONING BOLTS 1/4 turn clock-wise to tension,

NOT exceeding one full turn. (See Tracking (Centering) an Existing or New Striding Belt on previous page.

Repeat Step 3.)

CAUTION: DO NOT MOVE OR PLACE YOUR HANDS UNDER THE UNIT WHILE THE MACHINE IS

PLUGGED INTO AN ELECTRICAL OUTLET.