4
FIGURE 3

STEP 3:

• LOOSEN the SHAFT COLLAR SET SCREWS and slide them off the GUIDE RODS.
1/2 X 4” BOLT
(EXISTING)
TOWER
BRACE
GUIDE
RODS
TOWER
SHAFT
COLLARS
• Remove two 1/2 X 4” BOLTS, two 1/2” WASHERS, and two 1/2” LOCK NUTS from the TOWER BRACE to remove the TOWER
BRACE from the TOWER and GUIDE RODS as shown in FIGURE 3.

STEP 2:

• Snap two WEIGHT PLATE BUSHINGS (3) into the top of all five WEIGHT PLATES (6) as shown in FIGURE 2.
FIGURE 2
3
6
0123456
1/2 1/2 1/2 1/2 1/2 1/2