Life Fitness 897104 manual Should be on top

9

24

15

3/8 X 1-1/4” 12

4

5

25

26

21

1

FIGURE 8

7

STEP 8:

•Insert two GUIDE RODS (4) into the STACK BASE (1) as shown in FIGURE 8. Lubricate the GUIDE RODS (4) with a slicon or teflon spray that is available at most hardware stores.

•Slide two WEIGHT STACK CUSHIONS (21) down over the GUIDE RODS (4). See FIGURE 8.

•Using EXTREME CARE slide twenty WEIGHT PLATES (25) down over the GUIDE RODS (4) with the key-hole facing as shown in FIGURE 8.

•Securely assemble the 20 HOLE SELECTOR SHAFT (5) to the HEAD PLATE (24) using one 3/8 X 1-1/4” BOLT (12) and one 3/8” WASHER

(15).(Note: The bolt hole in the HEAD PLATE

(24)should be on top.)

•Carefully Slide the HEAD PLATE ASSEMBLY (5 & 24) down over the GUIDE RODS (4) onto the weight stack as shown in FIGURE 8.

•Slide two 13/16” SHAFT COLLARS (9) over the GUIDE RODS (4) as shown in FIGURE 8.

•Apply one set of WEIGHT STACK LABELS - 1-25 (26) to each WEIGHT PLATE (25) as shown in FIGURE 8.