Life Fitness 95T-XXXXX-02 manual Cables, Commercial Treadmill, S/N TWT108899 and up, Description

COMMERCIAL TREADMILL	95T-XXXXX-02
Cables	S/N TWT108899 and up

Description	Quantity	Part No.
Green and yellow ground wire with spade lug on one end and
ring terminal on the other; one goes from the IEC connector	2	AK26-00348-0000
to the frame, the other from the line filter to the frame
External power cable with ferrite	1	AK32-00160-0000
75-inch RG6 coax cable	1	AK65-00062-0000
Main power cable from DSP to console	1	AK58-00034-0001
Mov filter cable with a two-pin connector on one end and a
terminal on the other end of one green wire; it also has two	1	AK58-00224-0001
spade lugs at the end of a varistor spliced to the other green
wire
Hi-pot jumper cable has a two-pin connector with a green	1	AK58-00263-0000
wire looped between the pins.
Cable from MIB in console to Activity Zone	1	AK65-00043-0001
Heart rate Ergo bar cable	1	AK65-00047-0000
20-inch C-SAFE cable; from splitter to console	1	AK65-00051-0000
65-inch C-SAFE upright cable; runs from the base to the	1	AK65-00051-0001
splitter in the bridge assembly
Cable from on/off switch to motor controller (domestic)	1	AK65-00073-0000
Cable from on/off switch to motor controller (international)	1	AK65-00073-0001
Cable assembly; power DSP, high voltage (international)	1	AK65-00073-0002
Home switch cable from home switch to motor controller	1	AK65-00074-0000
AC power cable with an IEC connector on one end and a ring
terminal on the green/yellow wire; spade lugs on the brown	1	AK65-00081-0000
and blue wires

23