Receiver operation

Programme overview

(in TV mode only)

Press the key once again:

The programme overview appears on the screen.

The programme currently selected is indicated by <..>.

The keys can be used to single-step through the programme list

while the keys allow you to page through in steps of 10.

Pressing the key once results in switchover to the marked programme.

On exiting the programme overview with key there is a switch back to the previous programme.

Pressing the key twice results in switchover to the marked programme and exit from the programme overview.

To exit from the menu without selecting a programme press key.

Picture optimisation when reception is weak

Where weak reception results in a grainy picture as, for example, at the fringes of the reception area, the "Picture optimisation" function can be used to achieve an improvement.

!Press￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿ZHDN3LFWXUHtheUHFHSWLRQRSWLPLVDWLRQkey. TheIRUfollowing on-screen display appears:

 

With the

keys you can now carry out picture optimisation.

Note

The power radiated by individual transponders (satellite programmes) varies. Be-

 

sides this, the footprints of the transponders are also different. Picture optimisation

 

must therefore be carried out for each programme and is not stored either. This

means that picture optimisation must be carried out again after changing the pro- gramme.

14

Page 14
Image 14
Kathrein UFD 345 manual Picture optimisation when reception is weak, Programme overview