Contents
Controls, displays and connections | 3 |
View of front panel with infrared sensor, rear panel and remote control handset | 3 |
Front panel and infrared sensor | 4 |
Rear panel connections | 4 |
Remote control handset keys | 4 |
Safety instructions | 5 |
Important notes regarding operation | 5 |
Important notes on siting and installation | 6 |
Connecting up and putting into operation | 7 |
Installing the receiver | 7 |
Infrared sensor | 7 |
Connecting up the unit | 7 |
Inserting batteries into remote control | 9 |
Receiver operation | 10 |
Switching the unit on | 10 |
Switchover between TV and radio mode | 10 |
Selecting a programme | 10 |
Adjusting volume, balance and tone | 11 |
Muting the sound | 11 |
12 | |
Video recorder playback (VCR) | 12 |
SAT/TV changeover | 12 |
Operating the receiver without remote control | 12 |
Swapping, sorting and inserting programmes | 12 |
Displaying the Info menu and programme overview | 13 |
Picture optimisation when reception is weak | 14 |
Programming TV programmes | 15 |
Tuning in TV programmes | 15 |
The “Video” menu | 15 |
Decoder menu | 17 |
Programme name | 17 |
The “Audio” menu | 18 |
Programming radio programmes | 19 |
Tuning in radio programmes | 19 |
The “Radio” menu | 19 |
Initial settings | 20 |
Calling the initial setup menu | 20 |
OSD language | 21 |
LNB supply voltage | 21 |
LNB supply voltage in standby | 21 |
Programme selection | 21 |
On Screen Displays (OSD) | 21 |
Oscillator frequency | 22 |
DiSEqC menu | 23 |
22 kHz signal | 24 |
Tone burst and DiSEqC signal | 24 |
Switching over remote control’s command set | 25 |
Features | 26 |
Specifications | 27 |
Menu structure | 29 |
Connection examples / Service note | 32 |
Drilling template | 33 |
2
