7
STEP 1:
Slide the RIGHT SUPPORTLEG (55) over the MOUNTING TUBE (A) of the RIGHT UPRIGHT(4). Loosely secure
the RIGHT SUPPORTLEG (55) and RIGHT UPRIGHT(4) to the FRONT UPRIGHT(1) using two M12 x 80mm
SCREWS (60), four 1/2” WASHERS (61), and two M12 HEX NYLOCK NUTS (62) as shown.
With the UPPER PULLEYASSEMBLY (25) oriented as shown, insert the UPPER PULLEYASSEMBLY (25) into the
top of the RIGHT UPRIGHT(4) and secure together the RIGHT UPRIGHT(4), FRONT UPRIGHT(1), and UPPER
PULLEYASSEMBLY (25) using two M10 x 30mm SCREWS (58) and two FLAT3/8” WASHERS (57).
Repeat the above steps to assemble the LEFT UPRIGHT (5) and LEFT SUPPORTLEG (56) to the FRONT
UPRIGHT (1).
NOTE: THE TOP PULLEY WELDMENT ATTACHES TO THE INSIDE OF THE UPRIGHT SIDES AND THE ORIENTA-
TION SHOULD BE AS SHOWN.
Mid Pulley Covers - See Attached
Front Cover
8317301
Rear Cover
8263501
Top Cover
8263401