16
STEP 10:
Insert the ball end of one GUIDE CABLE (42) through the eye hook on one FLOATING PULLEYASSEMBLY (11).
Insert and hook the ball end of the cable into the SLOTTED BUSHING (L)located at the bottom of the frame located
directly below the FLOATING PULLEYASSEMBLY (11).
Screw the threaded end of the cable into the FRONT UPRIGHT(1) and loosely tighten the cable by screwing the
JAM NUT (M) to the top of the frame.
REPEAT THEABOVE PROCESS FOR THE REMAINING GUIDE CABLE (42).