Life Fitness Service Kit Instruction
HOW TO... REPLACE ROCKER ARMS
Tools required: Snap ring pliers, 3/8 Socket set, and Standard wrench set
Step 1
Unplug the unit at the electrical outlet. |
|
Step 2 | Rocker Arms |
Raise the boot covers on the upper arms then remove | |
three mounting bolts from each upper arm. |
|
Step 3 |
|
If equipped, remove the clevis covers. |
|
Step 4 |
|
Remove the nut and bolt securing the PEDAL LEVER to |
|
the ROCKER ARM, and lower the pedal lever. |
|
Step 5 |
|
Remove the END CAP and internal snap from the rocker |
|
arm. |
|
Step 6 |
|
Remove the rocker arm. |
|
Step 7 |
|
End Cap
Torque
Bolts(2)
Pedal Lever
Install the new rocker arm in reverse order.
NOTE: For units without clevis covers, plug the square holes in the bottom of the rocker arms with the supplied plugs.
NOTE: For units with clevis covers, insert the nylon grommets (nuts) as supplied, then install clevis covers.
Snap
Ring
Wave
Washer
Flat Washers
Snap
Ring
Rocker Arm
Insert Plug or Nylon Grommet into square opening
