D E
2 |
C
C
| F |
| I |
|
| 1 | |
G |
| H | |
|
| ||
|
|
|
STEP 8:
Spotter Platform accessories are available for the HDCR8.
Assemble each Spotter Platform (C) to the FRONT RIGHT & LEFT UPRIGHTS (1 & 2) using two BOLTS (D), two DOME WASHERS (E), two SPACERS (F), one WEAR PLATE (G), two FLAT WASHERS (H), and two NUTS (I) as shown in the illustration.
NOTE: All necessary hardware for the Spotter Platform assembly is included with the accessory. Make sure the flange on the SPACER (F) faces the inside of the rack.
15
