10
STEP 2:
LOOSELYassemble the two CROSS SUPPORTS (8) and two PULL-UP SUPPORTS (9) to the top of the FRONT
RIGHT &LEFT UPRIGHTS (1& 2) using eight 1/2 X 4-1/2” BOLTS (4), sixteen 1/2” INTTOOTH LOCK WASHERS
(6) and eight 1/2” LOCK NUTS (7).
Assemble the LOWER CROSS BRACE (10) to the inside of the two BASES (3) using four 1/2 X 4-1/2” BOLTS (4),
four BACKING DOME WASHERS (5), four 1/2” INTTOOTH LOCK WASHERS (6) and four 1/2” LOCK NUTS (7).
NOTE: An Upper Band Peg accessory is available for the HDCR8. Assemble the UPPER BAND PEG ACCESSORY (A)
to the FRONT LEFT UPRIGHT (2) at the same time as the PULL-UPSUPPORTS (9).Use the same hardware
with the exception of replacing the 1/2 X 4-1/2” BOLTS (4) with the provided 1/2 X 5” BOLTS (B).
6
4
67
8
9
5
3
10
6
4
7
54
76
9
8
2
2
1
1
B6
A
2
679