STEP 4:
WIth the ROLLER CARRIAGE ASSEMBLY (D) oriented on its side, carefully position the ROLLER CARRIAGE ASSEMBLY (D) over the MAIN FRAME ASSEMBLY (1) and tilt into its final position as shown.
NOTE: IF NECESSARY, PULL ON THE CARRIAGE KNOB (E) TO GET THE ROLLER CARRIAGE (D) ON THE MAIN FRAME ASSEMBLY (1).
Attach the two remaining ROLLERS (2) to the ROLLER CARRIAGE ASSEMBLY (D) using one M10 x 110mm SCREW (17), two FLAT 3/8” WASHERS (19), and one M10 HEX NYLOCK NUT (18) each. Tighten the screws and nuts securely.
NOTE: THE TWO ROLLERS SHOULD BE POSITIONED ABOVE THE MAIN FRAME ASSEMBLY (1).
9
