Life Fitness LCD Entertainment System

How To Program TV Consoles - continued

To program TVs with remote control consoles:

1. Leave the remote control cable plugged in.

2. Plug the C-SAFE cord into the black 8-pin connector on the back of the console.

3. Place the 9-volt battery in the programmer.

4. Plug the other end of the C-SAFE cord into the programmer.

5. The programmer will give this feedback that the updating procedure is taking place:

a. The green LED will glow steadily.

Coax

b. The yellow LED will then glow

Cable Power

steadily.

c. The yellow LED will then begin

Cable

Tan 10-Pin Connector

flashing.

d. The console software has been

(for remote control)

Black 8-pin C-SAFE connector

updated when the green LED begins

flashing slowly.

 

6.Unplug the C-SAFE cord from the programmer.

7.Unplug the C-SAFE cord from the console.

8.Verify that the console’s software version matches the software version on the programmer. If the console version number is still lower, repeat the procedure.

2

M051-00K32-A086

Page 2
Image 2
Life Fitness M051-00K32-A086 Green LED will glow steadily, Yellow LED will then glow, Steadily, Yellow LED will then begin