Life Fitness OHDHR FIGURE 4

STEP 4:

FIGURE 4

• LOOSELY assemble the PULL-UP SUPPORT (8) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOL TS (25), four 1/2” PLASTIC

DOME WASHERS (21), four 1/2” INT TOOTH LOCK WASHERS (19) and four 1/2” LOCK NUTS (22) as shown in FIGURE 4.

1/2 X 4-1/4” 25

Contents

Main PARTS LIST Tools Required for Assembly Bolt Length Ruler NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT. * 3/4, 9/16 wrench * Ratchet with 3/4, 9/16 socket * 7/32 Allen Wrench Page STEP 1: FIGURE 1 STEP 2: FIGURE 2 STEP 3: FIGURE 3 STEP 4: FIGURE 4 STEP 5: FIGURE 5 Page STEP 7: FIGURE 7 DETAIL 7 STEP 8: FIGURE 8 STEP 9: FIGURE 9 STEP 10: FIGURE 10 STEP 11: FIGURE 11 PREVENTATIVE MAINTENANCE TIPS Clean: Inspect: Lubricate: VISIT US AT: HAMMERSTRENGTH.COM