What to do if …
Problem | Possible cause | Remedy | ||
|
|
|
|
|
Connection of a decoder does not work or does | a) | The signal is not decoded because the correct | a) | Follow the instructions in the TV menu – |
not work properly |
| decoder programs have not been selected in |
| Connections again and select the appropri- |
|
| the TV menu - Connections |
| ate decoder programs. |
| b) | The sound is missing in decoder mode be- | b) | Follow the instructions in the TV menu – |
|
| cause the wrong decoder sound is allocated |
| Connections again and select the right sound |
|
| in the TV menu - Connections |
| source (decoder, TV or Autom.), see instruc- |
|
|
|
| tions of the decoder. |
|
|
|
|
|
No sound through the TV loudspeakers | a) | The item ”Sound from...” in the Sound menu | a) | Change the setting to ”TV”. |
|
| under ”Sound” is not set to ”TV” | b) | Either a dummy plug with bridges, Loewe |
| b) | Nothing is inserted in the |
| active loudspeaker system, the transmitter |
|
| on the back of the set |
| for the home automation or a subwoofer |
|
|
|
| must be plugged into the cubic socket. |
|
|
| ||
All menus appear in the wrong language | The wrong menu language has been set | Set your menu language: | ||
|
|
| 1. | Switch off |
|
|
|
| switch off all |
|
|
|
| button |
|
|
| 2. | Launch the TV menu (M button) |
|
|
| 3. | Select the last menu item and press OK |
|
|
| 4. | Select the last menu item on the last page |
|
|
|
| and press the OK button |
|
|
| 5. | Now select the right language and |
|
|
| 6. | ... confirm with OK. |
|
|
|
|
|
Digital Link Plus does not work | a) | The VCR has not been logged in as a Digital | a) | Log in the Digital Link Plus VCR under ”Con- |
|
| Link Plus device or has been connected to the |
| nections” and connect according to the |
|
| wrong socket |
| diagram. |
| b) | The | b) | Change the |
|
| not wired) |
|
|
| c) | Some video recorders can only take over the | c) | Reinstate the original state |
|
| channels from the TV in initial installation |
| the VCR (see operating instructions of the |
| d) | All or some terrestrial or cable channels are |
| VCR) |
|
| stored at channel slots ∗ 99 | d) | Sort the terrestrial and cable channels so |
|
|
|
| that they are between 1 and 99. |
|
|
| ||
Various characters are displayed incorrectly in | The wrong character set is set in the teletext | Set the right character set: Teletext menu – | ||
teletext | menu | Settings – Character set – Standard or the ap- | ||
|
|
| propriate character set. | |
|
|
|
|
|
22
