Operating additional equipment
Video playback
In order to see the VCR picture on your TV and hear its sound you have several possibilities:
1.You can use the
If you are playing back from a VCR with Digital Link Plus, the VCR picture is shown on the current channel slot.
If you are playing back from a standard VCR, DVD player or camcorder, select the AV socket to which the video signal is connected in the AV selection list or the channel table. Video recorders emit a switching voltage during playback which the TV set can decode (can be activated for every VCR in the con- nection wizard). Then the VCR picture is shown on the current channel slot as in Dig- ital Link Plus VCR’s.
2.You use the antenna connection between the VCR and the TV set. The sound is only broad- cast in mono. To do this, select the first menu item, e.g. VCR, in the AV selection list.
Launch the AV channel via the AV selection
0 Launch AV selection list
AV Selection VIDEO AV1 AV2 AV3 AVS
Select AV socket or VIDEO for
VCR transmitter.
Now you will see the playback from the con- nected AV unit.
Launch the AV channel via the channel overview
OK Launch the channel table
Channel overview: TV |
| Numerical | |
| AVS | 6 | |
| AV3 | 7 | |
| AV2 | 8 | DSF |
| AV1 | 9 | TM3 |
0 | VIDEO | 10 | PRO7 |
1 | ARD | 11 | RTL 2 |
2 | ZDF | 12 | WDR 3 |
3 | SAT.1 | 13 | BR 3 |
4 | RTL | 14 | HR |
5 | VOX | 15 | MDR 3 |
0 ... 9 Select program:
| Select and | Change programs | i | Info |
O K | press OK to proceed | Favourite programs | M | Menu |
|
| Change sorting | E | End |
In the numerical sorting you will always find the AV sockets at the top of the list without channel numbers.
Mark the AV socket
Now you will see the playback from the con- nected AV unit.
19
