INSTALLATION

The performance of your new PrecisionPower Component Loudspeaker system is directly proportional to the quality of installation. Care taken during the installation process will be rewarded with years of satisfying performance. If you are un- sure about your installation capabilities, please refer to your local Authorized PrecisionPower Dealer for technical assis- tance. If you decide to install the speaker system yourself, please read the entire owner’s guide before beginning your installation.

TOOLS OF THE TRADE

Listed below are tools you may wish to have on hand before starting your installation. Having the proper tools will make the installation much easier. Some of these tools are necessities, some will just make the job easier.

• Marking Pen

• Phillips Screwdriver

• Electric Drill

• Volt/Ohm Meter (Optional)

• 1/4" Drill Bit

• Assorted Tin Snips

• 1/8" Drill Bit

• Wire Cutters

• 3/8" Drill Bit

• Wire Crimpers

• Hole Saw Arbor

• Wire Strippers

• 4¾" Hole Saw (5¼” woofer install.)

• Razor Knife (Optional)

5¾" Hole Saw (6½" woofer install.)

1¾" Hole Saw (for flush mount tweeter install.)

FINDING SPEAKER MOUNTING LOCATIONS

Choosing the correct speaker locations can have a significant effect on the sound quality of the system. There are many dif- ferent considerations for choosing the locations that best suit your needs. The locations must be large enough for the speakers to fit without interfering with other vehicle parts such as window mechanisms, etc. Care is needed to ensure that the location you have chosen will not affect any of the me- chanical or electrical operations of the vehicle. If minimal intru- sion in your vehicle is desired, factory speaker locations may be the ticket for you. Placing the speaker in the factory loca- tion can often give you very desirable results. Alternative loca- tions to consider include mounting in customized kick panels, rear decks, or side panels.

FLUSH MOUNTING THE TWEETER

FIXED PANELS

Step 1: Determine the tweeter mounting location, then route the wires from the crossover to the tweeter location.

Step 2: Mark the center point of the tweeter location.

Step 3: If using a hole saw, first drill a pilot hole, then cut out the hole using a standard 2-1/8" hole saw.

Step 4: If not using a hole saw, use either the cardboard packaging for the tweeters or the surface mount trim ring as a template to mark the proper size hole. Cut out the hole.

Step 5: Remove the tweeter from the flush mount housing and insert the proper length machine bolt through the center hole of the housing.

Step 6: Connect the speaker wires observing the correct po- larity.

Step 7: Screw the bolts in until the tweeter housing is firmly mounted to the panel. (Make sure the arrow at the rear of the tweeter housing is pointing in the desired direction.)

Step 8: Insert the tweeter into the housing and attach trim ring.

Page 4
Image 4
Precision Power S2.65C Installation, Tools of the Trade, Finding Speaker Mounting Locations, Flush Mounting the Tweeter

S2.65C specifications

The Precision Power S2.65C is a high-performance component speaker system designed to deliver superior sound quality and clarity in car audio applications. Renowned for its robust build quality and advanced technologies, the S2.65C is tailored for audiophiles seeking an immersive listening experience while on the road.

One of the standout features of the S2.65C is its impressive 6.5-inch composite woofer. This woofer is engineered to produce deep, rich bass tones without compromising midrange clarity. The composite construction enhances durability while minimizing distortion, allowing the speaker to reproduce a full range of frequencies with remarkable accuracy. Additionally, the woofer's design includes a high-temperature voice coil, which ensures that the speaker can handle high power levels without overheating.

Complementing the woofer is a 1-inch silk-dome tweeter, which excels at delivering crisp, detailed highs. The silk dome material provides a smooth response across a wide frequency range, ensuring that vocals and instrumentals are rendered with a natural, airy quality. The tweeter is also equipped with a neodymium magnet, which enhances sensitivity and allows for a better dynamic response.

Another notable characteristic of the Precision Power S2.65C is its versatility in installation. The speakers come with a range of mounting options, making them suitable for various vehicle types. Their shallow mounting depth allows for fitment in spaces where larger speakers may not fit while still delivering exceptional sound performance. The inclusion of a crossover network ensures that each driver receives the appropriate frequencies, optimizing the overall sound quality.

The S2.65C also features advanced sound engineering technologies. One such technology is the high-pass filter, which prevents low frequencies from reaching the tweeter, resulting in a clearer high-frequency response. Additionally, the speakers are built to withstand the rigors of automotive environments, with weather-resistant materials designed to resist moisture and temperature fluctuations.

In summary, the Precision Power S2.65C stands out in the crowded car audio market with its combination of high-quality components, advanced technology, and durable construction. Whether used for casual listening or critical sound evaluation, these speakers provide an outstanding auditory experience, making them an excellent choice for car audio enthusiasts looking to elevate their in-car sound system.