INSTALLING THE CROSSOVER
Step 1: Find a location for the crossover away from any fac- tory or aftermarket electrical wires. It is recommended to mount the passive crossover close to the amplifier.
Step 2: Remove top cover of crossover housing. Don’t lose it.
Step 3: Mark the mounting holes with a marking pen.
Step 4: Remove crossover and
WARNING: Window mechanisms, electrical wires, and other expensive car parts have a nasty habit of hiding where you least expect. CHECK BEFORE YOU DRILL!
Step 5: Mount the crossover using the supplied #8 screws.
Step 6: There are two sets of connections on the crossover. The input terminals (IN) should be connected to the source (radio or amplifier). The woofer terminals (W) should be con- nected to the midrange speaker. The tweeter terminals (TW) should be connected to the tweeter. Be sure to observe the correct polarity. Changing the polarity of the tweeter may be necessary for optimum sound quality.
Step 7:
INTRODUCTION
Thank you for your purchase of this Sedona Series Compo- nent Loudspeaker System from PrecisionPower™. Our engi- neers have combined state of the art materials such as formed prolypropylene cones and mylar dome tweeters with cutting edge industrial design to achieve
PRACTICE SAFE SOUND!
Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High power automotive sound systems can generate sound pressure levels in excess of 130dB. When playing your system at high levels, please use hearing protection and prevent long term exposure.
WHAT’S IN THE BOX
Your new Sedona Series component speaker kit includes all the necessary mounting hardware and cables for a basic in- stallation:
Quantity | Description |
1 | Installation and Operation Manual |
2 | Mylar Tweeters |
2 | Tweeter flush mount hardware kits |
2 | Tweeter surface mount hardware kits |
2 | Component woofers |
2 | Passive crossovers |
4 | Speaker cables (speakers to crossover) |
2 | Grilles |
