Step 4: [Skip this step if using correctly sized factory loca- tions] Cut the hole for the speaker. A hole can be cut either with a pair of metal tin snips, an air or jig saw, or with a hole saw corresponding to the size of the woofer listed below.

•5 5/8” Hole Saw (6½” woofer installation)

WARNING: Window mechanisms and electrical wires and other expensive car parts have a nasty habit of hiding where you least expect. CHECK BEFORE YOU DRILL!

Step 5: Run the speaker wire to the speakers. Make sure to keep wires away from sharp metal or other edges. When passing through metal, use a protective grommet.

Step 6: Turn the speaker backwards against the surface & mark the mounting holes with a pen.

Step 7: Pre-drill mounting holes using a 1/8" drill bit.

WARNING: Window mechanisms and electrical wires and other expensive car parts have a nasty habit of hiding where you least expect. CHECK BEFORE YOU DRILL!

Step 8: Pull the wire through the speaker opening and con- nect to the speaker. Be sure to observe proper midrange po- larity during this process.

Step 9: To mount the speaker, the speaker is placed through the grille ring from the front. Place the speaker and the grille ring in the installation hole. Align the mounting screw holes and drive in the four mounting screws. Push the perforated metal grille back into the grille ring.

SURFACE MOUNTING THE TWEETER

Step 1: Determine the tweeter mounting location, then route the wires from the crossover to the tweeter location.

Step 2: Place the surface mount housing against the panel and mark the two holes at the rear of the housing.

Step 3: Drill the smaller center hole using a 1/8" drill bit. This is the mounting screw hole.

Step 4: Drill the larger off-center hole using a 3/8" drill bit, in- sert a grommet and route the speaker wire from the cross- over through the grommet.

Step 5: After removing the surface mount tweeter assembly trim ring, route the tweeter wires through the larger hole in the housing and connect to the speaker wires from the crossover.

Step 6: Insert the excess speaker wire into the hole and posi- tion the housing so the housing will not pinch the wires after final mounting.

Step 7: Attach the housing using the supplied screws of the correct length for a solid mount.

Step 8: Insert the tweeter into the housing and attach the trim ring.

Page 5
Page 6
Image 6
Precision Power S2.65C warranty Surface Mounting the Tweeter
Page 5

S2.65C specifications

The Precision Power S2.65C is a high-performance component speaker system designed to deliver superior sound quality and clarity in car audio applications. Renowned for its robust build quality and advanced technologies, the S2.65C is tailored for audiophiles seeking an immersive listening experience while on the road.

One of the standout features of the S2.65C is its impressive 6.5-inch composite woofer. This woofer is engineered to produce deep, rich bass tones without compromising midrange clarity. The composite construction enhances durability while minimizing distortion, allowing the speaker to reproduce a full range of frequencies with remarkable accuracy. Additionally, the woofer's design includes a high-temperature voice coil, which ensures that the speaker can handle high power levels without overheating.

Complementing the woofer is a 1-inch silk-dome tweeter, which excels at delivering crisp, detailed highs. The silk dome material provides a smooth response across a wide frequency range, ensuring that vocals and instrumentals are rendered with a natural, airy quality. The tweeter is also equipped with a neodymium magnet, which enhances sensitivity and allows for a better dynamic response.

Another notable characteristic of the Precision Power S2.65C is its versatility in installation. The speakers come with a range of mounting options, making them suitable for various vehicle types. Their shallow mounting depth allows for fitment in spaces where larger speakers may not fit while still delivering exceptional sound performance. The inclusion of a crossover network ensures that each driver receives the appropriate frequencies, optimizing the overall sound quality.

The S2.65C also features advanced sound engineering technologies. One such technology is the high-pass filter, which prevents low frequencies from reaching the tweeter, resulting in a clearer high-frequency response. Additionally, the speakers are built to withstand the rigors of automotive environments, with weather-resistant materials designed to resist moisture and temperature fluctuations.

In summary, the Precision Power S2.65C stands out in the crowded car audio market with its combination of high-quality components, advanced technology, and durable construction. Whether used for casual listening or critical sound evaluation, these speakers provide an outstanding auditory experience, making them an excellent choice for car audio enthusiasts looking to elevate their in-car sound system.
Top Page Image Contents