Sata Drive Installation | SUPER MICRO Computer 6015W-UR specification

SUPERSERVER 6015W-UR/6015W-U/6015W-NTR/6015W-NT User's Manual

SATA Drive Installation

The SATA drives are mounted in drive carriers to simplify their installation and removal from the chassis. These carriers also help promote proper airﬂ ow for the drive bays. For this reason, even empty carriers without drives installed must remain in the chassis.

Mounting a SATA Drive in a Drive Carrier

1.Insert a drive into the carrier with the printed circuit board side facing down so that the mounting holes align with those in the carrier.

2.Secure the drive to the carrier with six screws, as shown in Figure 6-4.

Figure 6-4. Mounting a SATA Drive in a Carrier

!

!

Use caution when working around the SATA backplane. Do not touch the backplane with any metal objects and make sure no ribbon cables touch the backplane or obstruct the holes, which aid in proper airﬂow.

Important: Regardless of how many SATA drives are installed, all drive carriers must remain in the drive bays to maintain proper airﬂow.

6-6

Image 62

SUPER MICRO Computer 6015W-UR, 6015W-NTR user manual Sata Drive Installation, Mounting a Sata Drive in a Drive Carrier

Contents

Super Manual Revision 1.0a Release Date April 23 Manual Organization PrefaceAbout This Manual System Safety Preface Table of Contents System Interface Bios Chapter Introduction Overview Serverboard Features Server Chassis Features Cooling System Front Control PanelBackplane CPU1 CPU2 Europe Contacting SupermicroHeadquarters Asia-Paciﬁc Unpacking the System Chapter Server InstallationPreparing for Setup Server Precautions Choosing a Setup LocationRack Precautions Ambient Operating Temperature Rack Mounting Considerations Identifying the Sections of the Rack Rails Installing the System into a RackInstalling the Inner Rails Installing the Outer Rails Installing the Rack Rails Installing the Server into the Rack Installing the Server into a Rack Installing the Server into a Telco Rack Installing the Server into a Telco Rack Checking the Components Checking the Serverboard SetupAccessing the Inside of the System Checking the Drive Bay Setup Checking the Drives Providing Power Checking the Airﬂow Control Panel Buttons ResetChapter System Interface Universal Information LED PowerControl Panel LEDs NIC2 Sata Drive Carrier LEDs Chapter System Safety Electrical Safety Precautions General Safety Precautions ESD Precautions Operating Precautions Installing the Onboard Battery Handling the Serverboard Chapter Advanced Serverboard SetupPrecautions Unpacking Processor and Heatsink Installation Installing the ProcessorPage Installing the Heatsink Removing the Heatsink Connecting Power Cables Connecting CablesConnecting Data Cables Connecting the Control Panel Front Control Panel Header Pins JF1 I/O Ports Memory Support Installing MemoryInstalling DIMMs Installing Dimm into Slot PCI Expansion Slots PCI Card InstallationAdding PCI Cards PCI Slot/Card Conﬁgurations Serverboard Details Super X7DWU Layout Jumper Description Default Setting X7DWU Quick Reference Connector Deﬁnitions HDD LED Universal Information LED Power Button Power Fail LEDReset Button Universal Serial Bus USB0/1 Fan Headers Universal Serial Bus HeadersSerial Ports Overheat LED Power LED/SpeakerATX PS/2 Keyboard and PS/2 Mouse Ports Wake-On-LAN Wake-On-Ring LAN1/2 Ethernet Ports Jumper Settings Explanation of Jumpers LAN Enable/Disable VGA Enable/DisablePower Force On Cmos Clear Memory Voltage Select Watch Dog Enable/DisableI2C Enable/Disable Onboard Indicators LAN1/LAN2 LEDs Floppy Connector Floppy, IDE and Sata Drive Connections IDE Connector Sata Ports Installing Drivers Driver Installation Display Screen Chapter Advanced Chassis Setup Static-Sensitive Devices Control Panel Chassis Front and Rear Views Replacing System Fans System FansSystem Fan Failure Drive Bay Installation/Removal Removing the Front Bezel Accessing the Drive Bays Removing the Front Bezel Sata Drive Installation Mounting a Sata Drive in a Drive Carrier Installing/Removing a Sata Drive Removing a Sata Drive from the Server Removing the Chassis Cover DVD-ROM and Floppy Drive InstallationRemoving/Installing a Drive 6015W-UR/6015W-NTR Power SupplyReplacing the Power Supply 6015W-U/6015W-NT Removing/Replacing the Power Supply Page Chapter Introduction Default settings are in bold text unless otherwise noted Running SetupMain Bios Setup Press the Delete key to enter Setup System Time Main Bios Setup Menu Main Setup FeaturesBios Date System Date CHS Format IDE Channel 0 Master/Slave and Secondary IDE Master/ SlaveType Ultra DMA Mode LBA Mode ControlTransfer Mode LBA Format ICH RAID Code Base Available when Sata RAID is Enabled Native Mode OperationSerial ATA Sata RAID Enable Sata Ahci Available when Sata RAID is Disabled QuickBoot Mode Advanced SetupBoot Features QuietBoot Mode EFI OS Boot Acpi ModePower Button Behavior Set Power On Password Memory Cache PCI Conﬁguration Advanced Chipset Control Memory Voltage Memory Branch ModeIntel VT for Directed I/O 4GB PCI Hole Granularity Demand Scrubbing High Temperature Dram OperationEnhanced x8 Detection AMB Thermal Sensor Advanced Processor Options Hardware Prefetcher Available when supported by the CPU C1/C2 Enhanced Mode Available when supported by the CPUExecute Disable Bit Available when supported by the CPU Direct Cache Access Available when supported by the CPU Device Conﬁguration DMI Event Logging Console Redirection Hardware Monitor Logic Fan Speed Control Modes Voltage Monitoring OS Boot Watch Dog Abled Bios Post ErrorsAbled Bios Post Watch Dog Timer for Loading OS Minutes System Event Log/System Event Log List Mode Realtime Sensor Data Set Supervisor Password Supervisor Password IsUser Password Is Security TPM Trusted Platform Modules Support Set User PasswordPassword on Boot Current TPM State Boot Boot Priority Order/Excluded from Boot Orders Exit Page Appendix a Bios Post Messages Real time clock error System Cmos checksum bad Default conﬁguration usedSystem timer error Check date and time settings Allocation Error for device System cache error Cache disabledFail-Safe Timer NMI Failed Entering Setup Invalid System Conﬁguration Data PS/2 Mouse Boot Summary ScreenFixed Disk n Device IRQ conﬂict System Bios shadowed Press F1 to resume, F2 to Setup, F3 for previousPress F2 to enter Setup Video Bios shadowedPage Terminal Post Errors Appendix B Bios Post CodesRecoverable Post Errors RAM failure on data bits xxxx* of low byte of memory bus Post Code Description Inform RomPilot about the end of Post optional Following are for boot block in Flash ROM Page Appendix C System Speciﬁcations Processors Chassis Expansion Slots see -6 for details Operating Environment