Chapter 5: Advanced Serverboard Setup

Wake-On-Ring

The Wake-On-Ring header is des- ignated JWOR. This function allows your computer to receive and "wake- up" by an incoming call to the modem when in suspend state. See the table on the right for pin defi nitions. You must have a WOR card and cable to use this feature.

SMB

The System Management Bus header (for the PCI bus) is designated SMB. Connect the appropriate cable here to utilize SMB on your system. See the table on the right for pin defi nitions.

SMBUS_PS

This header is for I2C, which may be used to monitor the status of the power supply. See the table on the right for pin defi nitions.

LAN1/2 (Ethernet Ports)

Two Ethernet ports (designated LAN1 and LAN2) are located beside the VGA port on the I/O backplane. These ports accept RJ45 type cables.

Wake-On-Ring

Pin Definitions

(JWOR)

Pin# Defi nition

1Ground (Black)

2Wake-up

SMB Header

Pin Definitions (SMB)

Pin# Defi nition

1Data

2Ground

3Clock

4No Connection

SMBUS_PS (I2C)

Pin Definitions

Pin# Defi nition

1Clock

2SMB Data

3N/A

4N/A

5N/A

5-17

Page 49
Image 49
SUPER MICRO Computer 6015W-NTR, 6015W-UR user manual Wake-On-Ring, LAN1/2 Ethernet Ports