SUPER MICRO Computer C2SEA, C2SEE user manual Installing and Removing DIMMs

Chapter 2: Installation

Possible System Memory Allocation & Availability

System Device

Firmware Hub flash memory (System BIOS)

Size

1 MB

Physical Memory Remaining (-Available)

(4 GB Total System Memory)

3.99

Local APIC

Area Reserved for the chipset

I/O APIC (4 Kbytes)

PCI Enumeration Area 1

PCI Express (256 MB)

PCI Enumeration Area 2 (if needed) -Aligned on 256-MB boundary-

VGA Memory

TSEG

Memory available to OS and other ap- plications

4KB

2MB

4KB

256MB

256MB

512 MB

16MB

1MB

3.99

3.99

3.99

3.76

3.51

3.01

2.85

2.84

2.84

Installing and Removing DIMMs

Notch	DDR3
	Notch

	Release	Note: Notch	Release
C2SEA/C2SEE	Tab	should align	Tab
		with the
		receptive point
		on the slot

To Remove: Use your thumbs to gently push the release tabs near both ends of the module. This should release it from the slot.

To Install: Insert module vertically and press down until it snaps into place. Pay attention to the alignment notch at the bottom.

Top View of DDR3 Slot

2-7