SUPER MICRO Computer C2SEA, C2SEE PCI/PCI-E Slots to SMB Speeds, Clear Cmos, JI2C1 JI2C2

Chapter 2: Installation

PCI/PCI-E Slots to SMB Speeds

Jumpers JI2C1/JI2C2 allow you to connect PCI/PCI-Exp. Slots to the System Manage- ment Bus. The default setting is open to disable the connection. See the table on the right for jumper settings.

Clear CMOS

SMBus to PCI-X/PCI-Exp Slots

Jumper Settings

Jumper Setting	Definition
Closed	Enabled
Open	Disabled (Default)

JBT1 is used to clear CMOS. Instead of pins, this "jumper" consists of contact pads to prevent the accidental clearing of CMOS. To clear CMOS, use a metal object such as a small screwdriver to touch both pads at the same time to short the connection. Always remove the AC power cord from the system before clearing CMOS.

Note: For an ATX power supply, you must completely shut down the system, remove the AC power cord and then close pins 1 and 2 to clear CMOS.

KB/MOUSE JPW2	CPU Fan
	Fan1

VGA

HDMI
SPDIF Out	USB2/3/4/5
LAN1	USB/0/1
HD AUDIO

CPU

JPUSB1	Fan5
	G45 (C2SEA)
	Intel
	G43 (C2SEE)
	Slot7 PCI-E x1

DIMM1A DIMM1B

DIMM1 DIMM2

DIMM2A DIMM2B

DIMM3 DIMM4

JPL1		C2SEA/C2SEE
	Slot6 PCI-E Gen2 x16	SPI BIOS
Lan		JBT1	Intel
CTRL	Slot5 PCI 33MHZ	CMOS CLEARC
			ICH10
		Battery

JPW1

SMBUS_PS1

Fan2Fan3

LE1

JLED1

JF1

A.JI2C1

B.JI2C2

C.JBT1

FP Audio			Slot4 PCI-E x4 on x16
A	JI2C1	JI2C2	B
			Slot3 PCI 33MHz
S I/O		CD1	Slot2 PCI 33MHz
			JPAC	JWOL1
			Slot1 PCI 33MHz
	Printer		JWOR	Floopy
			COM1

JD1

SPKR1 JPD1

JPI1

JL1

1394_1 1394_2

	JWD1		JOH1
			I-SATA0
	I-SATA4		I-SATA1
	I-SATA5		I-SATA2
	USB 10/11
			I-SATA3
IDE	USB 8/9	JPUSB2
CTRL
	USB6

USB7

IDEFan4

2-25