C2SEA/C2SEE User's Manual

2-3 Processor and Heatsink Installation

Warning: When handling the processor package, avoid placing direct pressure on the label area of the fan.

Notes:

1.Always connect the power cord last and always remove it before add- ing, removing or changing any hardware components. Make sure that you install the processor into the CPU LGA 775 socket before you install the CPU heatsink.

2.The Intel LGA 775 Processor package contains the CPU fan and heat- sink assembly. If you buy a CPU separately, make sure that you use only Intel-certified multi-directional heatsink and fan.

4.Make sure to install the motherboard into the chassis before you install the CPU heatsink and fan.

5.When receiving a motherboard with an LGA 775 Processor pre-installed, make sure that the CPU plastic cap is in place and none of the CPU pins are bent; otherwise, contact the retailer immediately. Refer to the MB Features Section for more details on CPU support.

Installing an LGA 775 Processor

1.Press the load lever to release the load plate, which covers the CPU socket, from its locking position.

PnP Cap on top of the Load Plate

Load Lever

2.Gently lift the load lever to open the load plate.

Load Plate (with PnP Cap attached)

2-2

Page 22
Image 22
SUPER MICRO Computer C2SEE, C2SEA user manual Processor and Heatsink Installation, Installing an LGA 775 Processor