SUPER MICRO Computer C2SEA, C2SEE user manual Xacpi Configuration

Chapter 4: AMI BIOS

XACPI Configuration

Use this feature to configure ACPI (Advanced Configuration and Power Interface) power management settings for your system.

ACPI Aware OS

Select Yes to enable ACPI support for the OS. Disable this feature if ACPI is not supported by your OS. The options are Yes and No.

Suspend Mode

This setting allows you to configure the ACPI (Advanced Configuration and Power Interface) state for your system when it is in the Supsend mode. The options are S1, S3 and Auto.

Report Video on S3 Resume

If set to Yes, VGA BIOS will be activated when the system is set to the S3/STR Resume mode. The options are Yes and No.

ACPI Version Feature

This feature allows the user to select ACPI Version for the system. The options are ACPI 1.0, ACPI 2.0, and ACPI 3.0.

Watch Dog Function

Select Enable to enable Watch Dog Timer and allow the system to reboot when it is inactive for more than 5 minutes. The options are Enabled and Disabled.

USB Device Wakeup from S3/S4

Select Enable to "wake-up" the system via a USB device when the system is in S3 or S4 State. The options are Enabled and Disabled.

Restore on AC Power Loss

The feature allows the user to set the power state after a power outage. Select Power-Off for the system power to remain off after a power loss. Select Power-On for the system power to be turned on after a power loss. Select Last State to allow the system to resume its last state before a power loss. The options are Power-On, Power-Offand Last State.

MPS Revision

This feature allows the user to specify the version of the Multi-Processor Specifica- tion (MPS) the motherboard is using. The options are 1.4 and 1.1.

Interrupt 19 Capture

Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt

4-5