Kit No.
Document No.
6.Remove the rocker arm from the deadshaft (see Figure 3). Discard all of the old hardware (Oilite washer, thrust washer, snap ring).
08 Sep 2008
Fig 3: removing the snap ring from the deadshaft
7.Loosen and push the shaft collar all the way onto the deadshaft (see Figures 4 and 5).
8.Inspect the deadshaft for smoothness. A badly worn or damaged shaft may require sanding to smooth it enough for the new rocker arm to slide on.
Fig 4: loosening the shaft collar
Fig 5: slide the collar against the bullhorn bracket
2
