Life Fitness SL05 manual AK50-WS003-0000

STRENGTH 9000 SERIES TRAINING EQUIPMENT SL05 Horizontal Leg Press

Weight Stack Shield

Placard
SL05-PL000-0001	Cable
Metal Label (2)
0K50-01001-0000	AK50-CL155-0001
	Weight Stack (400 lbs)
	AK50-WS003-0000

SK50-S0047-0000 Decal

M051-00270-A000 Plastic Shield

0K50-E0041-0000

Selector Pin

0K50-A1102-0000 Lanyard Cord 0017-00009-0938

Back Pad

0K50-US025-0000

End Cap (12) 0017-00042-0958

Weight Donut (2) 0017-00042-0993

	Handle Kit
	SK50-S0037-0000
	Spring
Foot Pad 6-3x4	0017-00009-0994
0017-00042-1019
Foot Pad 1-3x5.5
0017-00042-1020

Shoulder Pad, Left 0K50-US059-0000 Shoulder Pad, Right 0K50-US082-0000 Pad Mounting Bolts 0017-00101-1477

Head Pad

0K50-US030-0000

Pillow Block

0017-00006-0203 Red Rubber Cap 0017-00042-0952

Bolts

(for the Linear Rods) 0017-00101-1433

Linear Bearing (4)

SK50-S0031-0000 Grease Fitting 0017-00042-0999

Cable AK50-CL120-0007

Sk50-s0013-0000

Should only be used on older units where the top plate on the weight stack contains no holes. This kit consists of pin, lanyard attachment and plastic eye loop. The plastic eye loop fits over the Bayonet. The old style pin which was made of plastic is going to be upgraded with a rubber tulip head pin, but will still work with this kit.

0K50-A1102-0000

Fits only on newer units. Top plate on weight stack has an extra hole to accommodate the pin assembly. Push the end of the lanyard into the hole on the top plate. This style is currently being used on all 9000 strength series and MTS Hammer Units.

1 rev. 06/06/05