SM41 Unpacking & Assembly Instructions
5
Figure 3. Set the weight stack cells.
2. Bolt on the teardrop pulley above the bench (see Figure 4) on the 4 stack cell using
two 3/8” x 2-3/4” hex head bolts. Include the 3/8” flat washer, end cap washers, end
caps and 3/8” Nyloc nut. Use the bolt configuration shown in Figure 5. You may wish
to use a pinch bar to align the bolt holes.
3/8” x 2-3/4”
(
2
)
Figure 4. Bolt on the teardrop pulley.