3 CORRECT USAGE

3.1MOUNTING AND DISMOUNTING THE CROSS-TRAINER

If mounting from the user right side of the Cross-Trainer, grasp the user right handlebar with the right hand. Place the right foot on the user right pedal and carefully step over the Cross-Trainer, grasp the user left handlebar with the left hand, and place the left foot on the user left pedal. If mounting from the user left side, proceed in an opposite fashion. Reverse the process to dis- mount the Cross-Trainer.

3.2BIOMECHANICAL GUIDELINES

There are two exercise variations that can be performed on the Cross-Trainer. For each variation, it is important to follow these general biomechanical guidelines as well as the specific instructions listed below.

GENERAL

Feet should be in a comfortable position facing forward on the pedals so the knees move in a forward plane (not angled inward or outward) and so the hips do not rotate outward.

Keep back straight. Do not bend forward at the waist.

Keep both feet on the pedals at all times.

If desired, allow heels to slightly lift off the pedals during the motion.

Do not lock knees during the workout. Keep them slightly bent throughout the motion.

FORWARD MOTION – TOTAL BODY

Mount the Cross-Trainer facing forward

Hands should be positioned comfortably on the moving handles such that the elbow creates a 90 degree angle when the moving handlebar is rotated toward you

Choose the desired workout profile and duration on the console

Begin moving feet in a smooth forward pedaling motion by pushing top foot forward and pulling bottom foot backward

Exercise at a speed that is comfortable for you

REVERSE MOTION – TOTAL BODY

Mount the Cross-Trainer facing forward

Hands should be positioned comfortably on the moving handles such that the elbow creates a 90 degree angle when the moving handlebar is rotated toward you

Choose the desired workout profile and duration on the console

Begin moving feet in a smooth reverse pedaling motion by pulling top foot backward and pushing bottom foot forward

Exercise at a speed that is comfortable for you

BRAKING RESISTANCE

The Life Fitness Cross-Trainer features speed-dependent braking resistance. For a set resistance level on the monitor, the resistance increases with speed. The faster you go, the greater the resistance. The computer makes no adjustments to maintain the resistance level based on your speed.

12

Page 13
Image 13
Life Fitness SX30 user manual Mounting and Dismounting the CROSS-TRAINER, Biomechanical Guidelines