1. Check the code on the test strip vial before inserting the strip

Code numbers are used to calibrate your meter with the test strips you are using.

2. Insert a test strip to turn on the meter Start with the meter off. If you have turned the meter on to change settings or review past results, turn it off. Remove a test strip from its vial. With clean, dry hands, you may touch the test strip anywhere on its surface. Do not bend, cut or modify the test strips in any way. Use each test strip immediately after removing it from the vial.

Insert the test strip into the test port as shown. Make sure the three contact bars are facing you. Push the strip in as far as it will go. Do not bend the strip.

process test the Starting

After the black start-up screen appears, the meter will display the code from your last test. If

a flashing “––” appears instead of a code number, such as when you are first using the meter, follow the instructions on the next page to change to a numerical code.

Customer Service 1 800 227-8862

11