7. Set the hour and “AM” or “PM”
Press 
or 
to set the hour.
Check AM/PM. If not correct, continue to press 
or 
until the hour and “AM” or “PM” are correct.
You can ONLY change “AM” and “PM” when you pass 12:00. Make sure “AM” or “PM” is correct while you are setting the hour.
Press 
to confirm your selection.
Press 
or 
to set the minutes.
Press 
to confirm your selection.
The display now shows the SETTINGS screen.
If “AM” or “PM” is not correct, press
or 
to highlight “NO”and press 
to start over (Step 3 on page 5).system your up Setting
Customer Service 1 800 | 7 |