Turbosound M18 quick start Technical Specifications, Spares and Accessories, MAX Input +20dBu

Quick Start Guide

Milan M18

Technical Specifications

Dimensions (h x w x d)	600mm x 700mm x 600mm (23.6” x 27.6” x 23.6”)
Net weight	45 kg (99lbs)
Components	1 x 18”(457mm) LF driver
Frequency response	36Hz – 80Hz/125Hz ±3dB, 28Hz – 80Hz/125Hz ±10dB
Maximum SPL	125dB continuous, 131dB peak
Construction	18mm plywood enclosure finished in dark blue textured paint
Connectors	Input: (2) Jack/XLR female, wired pin 2 hot; Link: (2) XLR male, wired pin 2 hot;
	Output: (2) XLR male, wired pin 2 hot; IEC mains connector
Controls	Level, switchable high-pass filter at 80Hz or 125Hz, phase invert, ground lift
Indicators	Signal / Limit bi-colour LED (signal: green, limit: red), power LED
Amplifier	TYPE: Class D
	POWER OUTPUT: 1000 watts continuous @ 8 ohms (1kHz, 0.01% THD)
	MAX INPUT: +20dBu
	USER EQUALISATION: switchable low-pass filter at 80Hz or 125Hz
	LIMITING: Thermal limiter, current overload
	POWER REQUIREMENTS: 110V AC @ 50Hz or 230V AC @60Hz

Spares and Accessories

LS-1816	18” low frequency loudspeaker
RC-1816	Recone kit
M18AMP	Amplifier module

Turbosound Ltd., Star Road, West Sussex RH13 8RY, UK

tel: +44(0)1403 711447 fax: +44(0)1403 710155 www.turbosound.com version 1.0 05/10

Milan M18 Quickstart Guide v1.0 - Page - 2