Before Measuring Your Weight

Switching the unit of measure

A unit selection switch is provided on the underside of the scale so that you can choose the unit to measure your weight, kg or lb.

Slide the switch to the lb side. : lb (weight) and ft-in (height)

Slide the switch to the kg side. : kg (weight) and cm (height)

Presetting Your Height

The scale can save a height between 1-8 ft (increments of 0.1). The procedure below is an example of how to preset the height of User 1 to 5 ft 10.5".

1 With the scale turned off, press and hold Switch 1.

To preset the height of User 2, press and hold Switch 2.

2 Release the switch when “ - ” appears. Then, press Switch 1 again.

3The height currently set appears.

When the height has not been preset (factory setting), “OFF” appears. Under this condition, the BMI calculation is not available.

4 Set your height.

Press Switch 1 to decrease the number or Switch 2 to increase the number. Press and hold the switch to increase or decrease the number continuously. The setting range is 1-8 ft. When the number reaches 8, “OFF” appears and the number returns to 1.

5 After five seconds, the height is saved in memory. “End” appears and the scale turns off automatically.

- 6 -

Page 6
Image 6
LifeSource UC-322 manual Presetting Your Height, With the scale turned off, press and hold Switch