Installing (or Replacing) Batteries

Caution

Insert each battery with its positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment.

Replace all four batteries with new ones, when the symbol appears flashing.

When the batteries are depleted completely, nothing is displayed even if the switch is pressed.

Do not mix used and new batteries. It may cause damage to the batteries or scale, if used.

The battery life is dependant upon the environmental temperature, battery type and usage.

Remove the batteries from the battery compartment, when the scale is not to be used for a long time. They may leak and damage the scale.

The battery life of the accessory batteries may be shorter than new ones.

Steps for Installing (or Replacing) Batteries

1 Remove the battery compartment cover on the underside of the scale by gently pushing the hook in the direction indicated by the arrow and lifting the cover backward.

2 Install four new batteries with the positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment.

3 Replace the cover by sliding it into the compartment and gently pressing into place.

Maintaining the Scale

Clean the scale with a soft dry cloth or a cloth moistened with water and a mild detergent. Never use alcohol, benzene, thinner or other harsh chemicals to clean the scale.

Remove the batteries, if the scale is not going to be used for a long time.

- 4 -

Page 4
Image 4
LifeSource UC-322 manual Steps for Installing or Replacing Batteries, Maintaining the Scale