SET TING AND OPERATING
SETTING AND OPERATING THE 24-HOUR ALARM
Activation: from Heart Rate/Time of Day Screen by pressing and holding the SET key for 2 seconds.
SET TING AND OPERATING
VIEW
Enter set daily alarm
Press and hold SET key to enter
: Press and HOLD key : Press and RELEASE key
The LifeSource XC300 Heart Rate Monitor is equipped with a
1.The Stopwatch must be cleared to zero before the setting sequence for the
2.When setting the Alarm in
3.If the Alarm is turned on and the Stopwatch is not running, the upper left corner of the Heart Rate/Time of Day screen will display “AL” to show that the Alarm is active.
4.If the Stopwatch is running, the upper left corner of the Heart Rate/Time of Day screen will show Time in Target Zone.
5.If the Alarm is turned off and the Stopwatch is not running, the upper left corner of the display will be blank.
Set hours
Press SET key to advance
Press START/STOP key to reverse
Press MODE key to set Hold for fast advance
Set minutes
Press SET key to advance
Press START/STOP key to reverse
Press MODE key to set Hold for fast advance
Activation: from the Heart Rate/Time of Day Screen by pressing and releasing or pressing and holding the START/STOP key for three seconds.
: Press and HOLD key : Press and RELEASE key
Press and release START/STOP | Press and hold START/STOP key to change |
key to view alarm setting | alarm setting |
12 Toll Free LifeSource Health Line
Toll Free LifeSource Health Line