troubleshooting & maintenance

Troubleshooting

Problem:

Unit vibrates or bounces, not stable

Solution:

Make sure the unit is not set up on plush carpet with padding. The unit needs to be

 

set up on a semi firm surface. Make sure the base of the vibration plate is level by

 

making adjustments with the 4 adjustment feet on the bottom of the unit.

Problem:

Noises coming from the base unit of the vibration plate.

Solution:

Lay the unit on it’s side and tighten all hardware on the bottom of the vibration plate.

 

Contact LifeSpan Customer Service if problems persist.

Problem:

LCD Shows Er1

Solution:

Contact LifeSpan Customer Service.

Problem:

LCD Shows Er3

Solution:

Check Wire connections at the back of the console and at the base of the unit where

 

the wires were attached when installing the Handlebar Support Frame.

Problem:

LCD Shows Er5

Solution:

Possible Motor Overload. Turn the unit off and let it sit for 5 minutes. Turn the unit

 

back on and retry. If problem persists contact LifeSpan Customer Service.

Problem:

LCD Shows (---)

Solution:

Safety key not making good contact. Remove safety key and reinstall. If problem

 

persists contact LifeSpan Customer Service.

Maintenance:

1.Every 3 months using the tools provided check all assembly hardware to make sure it is tight.

2.Keep the unit clean and dry. Use a damp cloth to wipe the unit off.

3.If the unit is not going to be used for a period of time, unplug the unit and store in a clean dry environment.

14

Page 17
Image 17
LifeSpan VP1000 manual Troubleshooting & maintenance, Maintenance