JVC KD-S5050, KD-S10 manual Troubleshooting, English, Symptoms, Causes, Remedies

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

		Symptoms	Causes		Remedies
	•	Sound cannot be heard	The volume level is set to the	Adjust it to the optimum level.
		from the speakers.	minimum level.
			Connections are incorrect.	Check the cords and
General				connections.
	•	all.	may have functioned	press		(Standby/
		This unit does not work at	The built-in microcomputer	While holding SEL (Select),
			incorrectly due to noise, etc.	On Attenuator) for more
				than 2 seconds to reset the unit.
				(The clock setting and preset
				stations stored in memory are
				erased) (See page 2)
	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
		Sequential Memory)
FM/AM		automatic preset does not
		work.
	•	Static noise while listening	The antenna is not connected	Connect the antenna firmly.
		to the radio.	firmly.
	•	CD automatically ejects.	CD is inserted upside down.	Insert the CD correctly.
	•	CD-R cannot be played	CD-R is not finalized.	• Insert a finalized CD-R.
		back.
	• Tracks on the CD-R cannot			• Finalize the CD-R with the
		be skipped.		component which you used
				for recording.
	• CD can be neither played		CD is locked.	Unlocked the CD. (See page 11)
		back nor ejected.
Playback			The CD player may have	While holding
			functioned incorrectly.	(Standby/On Attenuator), press
				/ (Eject) for more than 2 seconds.
				Be careful not to drop the CD
CD				when it is ejected.
	• CD sound is sometimes		You are driving on rough	Stop playback while driving on
		interrupted.	roads.	rough roads.
			CD is scratched.	Change the CD.
			Connections are incorrect.	Check the cords and
				connections.
	•	“NO DISC” appears on the	No CD in the loading slot.	Insert a CD into the loading slot.
		display.
			CD is inserted incorrectly.	Insert the CD correctly.

ENGLISH

19