After Diving Care

1.Immediately submerge the housing in fresh water. While in fresh water, work the dials, levers and all the buttons, to work any remaining salt water out of the housing.

2.Remove housing from rinse tank and then simply towel dry.

Don’t abandon your Titan D100 in the rinse tank!!! It’s not uncommon for another housing or camera to be carelessly dropped into the rinse tank. Other equipment falling onto your Titan D100 can scratch ports or damage the housing body.

O-ring Care and Maintenance

O-rings are the critical component that keeps water out of the housing. Routinely inspect o-rings and replace at least once a year. If your o-rings are damaged, contact the Light & Motion service department for an o-ring replacement kit.

Follow these steps for proper o-ring care.

1)The sealing system used on the rear plate incorporates two o-rings.This is the most crit- ical area of the housing for maintenance and should be inspected before every dive.

2)Make sure the rear plate o-rings and the mating surface on the inside of the main hous- ing are clean from grit, hair, lint and anything that could potentially breach the o-ring seal.

3)After frequent diving or if o-rings appear dirty, remove o-rings and clean the grooves.To remove o-rings, use finger pressure or the rounded edge of a plastic card to lift the o- ring out of the groove.

Never use a metal object to remove an o-ring. It will cause dam- age to the o-ring and mating surface.

4)To check o-rings for damage, place the o-ring between the index finger and thumb.Then pull the o-ring through your fingers, feeling for any debris or wear.

5)If o-rings are dirty, it is best to replace them.Washing dirty o-rings with soap and water is not recommended. Soap breaks down the lubricants and will compromise the integri- ty of the seal.

6)Properly greased o-rings will help maintain sealing integrity and minimize o-ring degra- dation. Use enough grease to lubricate the o-ring thoroughly, but not so much that it will attract additional debris.

7)Clean the groove with a lint free swab or the folded edge of a paper towel.

8)Return O-ring to respective groove.

Titan D100 O-ring Replacement Kit part # 854-0129, includes two o-rings for the Rear Plate, two O-rings for a port and 1/4 oz. of O-ring grease.

Titan D100 Accessories

Titan D100 Fault Free Warranty . . . . . . . . . . . . . . .905-0200

Tetra Wetlink Sync Cord (Sea & Sea only) . . . . . . .854-0044

Titian D100 Custom Travel Case . . . . . . . . . . . . . . .775-0019

Sunray Mod Light . . . . . . . . . . . . . . . . . . . . . . . . . .850-0049

Titan Pointer Light . . . . . . . . . . . . . . . . . . . . . . . . . .854-0051

Titan D100 Electronics Replacment Kit . . . . . . . . .854-0152

Titan D100 Body Cap . . . . . . . . . . . . . . . . . . . . . . . .854-0148

Titan D100 Neoprene Dome Port Cover . . . . . . . .854-0149

Titan D100 O-ring Kit . . . . . . . . . . . . . . . . . . . . . . .854-0129

Smart Grip Battery and O-ring Kit . . . . . . . . . . . . .854-0117 Handle Thread Ring Replacement Kit . . . . . . . . . .854-0147

Handle Strobe Base Mounts . . . . . . . . . . . . . . . . . .854-0104

Page 12 Page 14
Page 13
Image 13
Light & Motion manual After Diving Care, Ring Care and Maintenance, Titan D100 Accessories
Page 12 Page 14

D100 specifications

The Light & Motion D100 is an exceptional dive light designed to meet the needs of underwater enthusiasts, offering a blend of durability, performance, and versatility. This powerful dive light is particularly favored by scuba divers, underwater photographers, and videographers who require high-quality illumination in the challenging underwater environment.

One of the standout features of the D100 is its impressive output of up to 1000 lumens, providing bright and even light that penetrates the depths of the ocean. The beam angle of 80 degrees ensures that divers can illuminate a wide area, making it ideal for exploring coral reefs or wrecks where peripheral visibility is essential.

The D100 is built with robust construction, featuring an aluminum body that is lightweight yet highly durable. This ensures that the light can withstand the rigors of marine environments, including resistance to corrosion from saltwater. The anodized finish adds an extra layer of protection against scratches and impacts, further enhancing its longevity.

In terms of battery technology, the D100 is equipped with a rechargeable lithium-ion battery that guarantees hours of use on a single charge. The intelligent battery management system allows for real-time tracking of battery life, providing divers with peace of mind by ensuring they have adequate light throughout their dive. The light also features a simple user interface with three brightness levels, enabling divers to easily adjust the output based on their specific needs.

The Light & Motion D100 is also designed to minimize environmental impact. It uses LED technology, which not only extends the life of the light but also consumes less energy compared to traditional lighting solutions. This efficiency translates to fewer battery changes and less waste over time.

Moreover, the D100 is designed for versatility, with a built-in mounting system that allows it to be easily attached to various camera systems and dive gear. This makes it an excellent choice for underwater photographers who require flexible lighting options.

In conclusion, the Light & Motion D100 blends innovative technology with exceptional performance, making it a top choice for divers and underwater photographers alike. With its robust construction, impressive lumen output, and efficient battery system, the D100 delivers reliable illumination for every underwater adventure. Whether you are exploring marine life or capturing stunning underwater images, the D100 stands out as a reliable companion in the depths.
Top Page Image Contents