Lightolier specifications Lytecaster Recessed Downlighting 1004SIC, Page 1 of, Frame-InKit

Lytecaster® Recessed Downlighting  1004SIC

Page 1 of 1		5" Aperture 0® Shallow Incandescent Convertible IC/Non-IC Frame-in Kit
		1004SICN
		(Integral Nail)
7			1004SIC	Overall Length
			(Integral Screw)	1004sic/N: 9"
1
			13" MIN.	Overall Width	Frame-In Kit
				1004sic/n: 5 3/4”
			24" MAX.
2		3		Top View
	5	4	Height		Reflector Trim
			1004sic/n:	5 1/2"
6

Ceiling Opening: 5 3/8" Diameter

5" Aperture: Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.

Frame-In Kit	Reflector Trims — See Individual Reflector Trim Specification Sheets
			Open Downlight
	Cone	Satin Cone	Baffles	Basic White	Wall Washer	Enclosed Diffuser
1004SIC	1012	1008	1005	1071	1085*	1024*
1004SICN	1012NM	1008NM	1005WH
	1013	1010	1005NM
	1013WH	1010NM	1005BNM
	1013CD		1076
	1013NM		1076WH
	1013BKNM
	1013CDNM					*for Non-IC applications only
	1013BK

Feature

1.Housing: .032” (#20 ga.) Aluminum. UL listed convertible IC/NON-IC. 2" vertical adjustment in ceiling. Can be removed for access to junction box and ceiling plenum. 5 1/2" tall for use in 2" X 6" joist construction and shallow plenum applications. AirSeal® housing minimizes air leakage to less than 2 CFM at 1.57 PSF (or 75pa), which complies with Model Energy Code (Section 602.3.3) and Washington State Energy Code (Section 502.4) and reduces heat loss and condensation in ceiling.

2.Mounting Frame: .048" (#18 ga.) galvanized steel. Locks into position along length of mounting bars with locking spring and bendable slot. (3) slots 90° apart simplify alignment.

3.Junction Box: 2" X 4" X 3 1/2" (22 cu. in.) .032" (#22 ga.) galvanized steel. UL listed for maximum of 8 (#12 ga.) 1104SIC/N and 6 (#12 ga.) 1004SIC/N 90°C through branch circuit conductors. Integral cable clamps permit attachment of non-metallic (#12 or #14 ga.) Romex® cable without tools or additional connectors.

4.Mounting Bars: .059" (#16 ga.) galvanized steel. Bars pivot for easy attachment and wire-in below ceiling line. Bars extend to accommodate 16" to 24" O.C. joist spacing. Bars can accommodate 9" O.C. joist spacing after a slight field modification (See Instruction Sheet). 1004SIC features integral self-tapping phillips screws for secure attachment to wood or metal construction. The 1004SICN features integral nails for secure attachment to wood. Both attach to T-bar ceilings without the need of accessories.

5.Socket Housing: Impact extruded aluminum or galvanized steel. Attached trim retaining spring secures trim to any height on housing wall.

6.Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with #18 ga. SF1 (300 Volt 200° C) leads to junction box.

7.Thermal Protector: Meets NEC and UL requirements. Located inside housing.

Options & Accessories

AirSeal® Kit: LAS56

NOTE: Use only if factory installed tape or knockouts are removed from vertical adjustment slots in housing wall.

Labels

UL (Type IC/NON-IC Convertible, Suitable for Damp Locations)

Complies with Air Leakage Requirements stated in the Model Energy Code and the Washington State Energy Code.

AirSeal® is a registered trademark of Lightolier.

Romex® is a registered trademark of General Cable Industries Inc.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2006 Genlyte Group LLC • I0806