![Inside Lens Assembly](/images/new-backgrounds/40663/406633x1.webp)
IS:4531
0995 | Page 2 of 2 |
|
|
Instructions for Installation of Arco™ 4531, 4532, 4533, 4551, and 4552 Series Fixtures.
7.Position Backplate over Crossbar allowing Crossbar Mounting Screws to come through Holes in Backplate. Secure Backplate in position by installing (2) Battery Nuts over Crossbar Mounting Screws and tighten.
8.If using Auxiliary Mounting Knockout, install the appropriate hardware determined in step 3.
9.Position Screw through Loop in Safety Cable and thread Screw into Mounting Boss on inside of Lens Assembly (Fig. 2).
10.Install recommended lamp(s).
11.Position Lens Assembly over Backplate making certain the Safety Cable does not interfere with the Gasket (fig. 1).
12.Secure Lens Assembly in place by tightening the (2) Mounting Screws on the face of Lens Assembly.
CAUTION: Maximum wattage as marked on fixture must not be exceeded.
CAUTION: For wet locations, in accordance with Underwriters Laboratories requirements, a line of caulking compound such as acrylic latex or silicone must be placed around the perimeter of Backplate to seal water away from the outlet box and back openings.
Glass
Mounting Boss
Loop
Mounting Screw
Safety Cable
FIG. 2
Inside Lens Assembly
LIGHTOLIER a GENLYTE company. |
|
631 Airport Road, Fall River, MA 02720 |
|
(508) | © 1995 |