Lightolier manual Job Information, Type, Calculite Incandescent Adjustable Accent 7052QD, Lamp

Calculite® Incandescent Adjustable Accent 7052QD

Page 1 of 2			4 1/4” Aperture T4 Clear T. H. Framing Projector
2	1	11	12

Top View 7 7/8"

3"

	1" min.-
	1 7/8" max.					4 1/8: Dia.
	(Ceiling Runner) 3 4	9		10
Flush Trim	White Trim Ring					Aperture
			9 3/16"		9 15/16"
			Flush				Overlap

Ceiling Cutout: 9 1/4” (235 mm) Dia.

13

14

				3/4" max.
				Ceiling
5	6	7	8	Thickness

Catalog Number		Lamp
7052QD	Matte White Finish	T-4 100W
		Clear Tungsten Halogen, Mini-Can Base, 120V

Features

1.Housing: Spun 16 ga. aluminum separates from frame for inspection through aperture.

2.Lampholder: Die-formed steel yoke with mini-can socket, 18 SF1 leads to J-box.

3.Mounting Brackets: Adjust vertically from inside of fixture. Durable 16 ga. steel construction. Use with standard 3/4" or 1 1/2" lathing channels, or 1/2" (11/16" O.D.) EMT pipe (by others) or Lightolier accessory mounting bars.

4.Face Plate: Die-formed steel 20 ga. with integral cone, matte white baked enamel.

5.Aperture Cone: Designed to minimize glare and reduce brightness at ceiling plane.

6.Molded Trim Ring: Provides minimum width white flange in dry or plaster ceiling.

7.Horizontal Locking Device: Provides locking of horizontal rotation. Optical assembly rotates up to 358°.

8.Mounting Frame: Die-cast aluminum, suitable for dry or plaster ceilings.

9.Locking Device: Allows removal of optical system for relamping without disturbing shutter position.

10.Vertical Locking Device: Locks optical assembly which may be adjusted from 0° to 45°.

11.Focusing Lens: System provides hard or softened edge image projection.

12.Shutters: Four spring shutters with porcelain hand knobs allow for adjust- ment by cut-off of edge of light beam. Internal clips hold 2" square or round templates (included).

13.Junction Box: 14 ga. steel, 4" x 3" x 2" box allows inspection from below.

14.Thermal Protector: Meets NEC and UL requirements. Insulation must be kept 3" away from fixture sides and wiring compartments and must not be placed above fixture in a manner which will entrap heat.

Accessories and Options

18" Mounting Bars	1950	(set of 2)
27" Mounting Bars	1951	(set of 2)
T-Bar Anchor Clips	1956	(set of 4, for 1950 & 1951 bars)
Wood Joist Mtg. Bars	7994	(set of 2)
Step Down Transformer	7997	(277V primary 1.1 amp/120V secondary,
		300W capacity)

Electrical

UL Listed for maximum of 8 No. 12, 75°C through branch circuit supply conduc- tors, or 60°C supply conductors for end of run.

Labels

UL Listed for damp locations, I.B.E.W.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s): Notes:

Lightolier a Genlyte Thomas Companywww.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902