DeVillbiss Air Power Company A08989, S2600 To Assemble Accessories Panel

5.To Assemble Accessories Panel

a.Remove top screws on handle assembly. (see Fig. 5)

Fig. 5
Remove	Screws

Loosen

b.Loosen bottom screws on handle assembly.

c.Place grooves in accessories panel assembly onto loosened bottom screws and slide panel assembly into place.

d.Place top screws (removed earlier) into top holes. Fasten screws to secure accessories panel assembly to handles. Do not overtighten.

6.Re-install cleaning solution tanks. Tilt cleaning solution tanks toward engine, slide onto handles, and snap into place. (see 6a and 6b)

Fig. 6a

Fig. 6b

7.Attach cleaning solution hose to barb fitting on control valve located at the rear of unit.

(see Fig. 7)

Fig. 7

barb fitting

8.Add engine oil (supplied) to engine. Refer to Engine Owners Manual supplied by engine manufacturer for correct procedure.

NOTE: There will be a slight amount of oil in the engine from factory testing.

NOTE: The pump on this unit is maintenance-free and requires no oil. If there is a problem with the pump call:

1-866-4SIMONIZ (1 866 474 6664).

7- ENG A08989