DeVillbiss Air Power Company S2600 Operating Instructions, Basic Elements Of A Pressure Washer

OPERATING INSTRUCTIONS

Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

Fig. 8

Spray
gun	High-pressure
	hose

Engine

Multi-adjustable spray wand

Dual-detergent

injection system

High-pressure pump (located inside the shroud)

BASIC ELEMENTS OF A PRESSURE WASHER

High-pressure pump (located inside the shroud): Increases the pressure of the water supply.

Engine: Drives the high pressure pump.

High-pressure hose: Carries the pressurized water from the pump to the gun and spray wand.

Spray gun: Connects with spray wand to control water flow rate, direction, and pressure.

Multi-adjustable spray wand: Allows the user to use high or low pressure and adjusts from a pencil stream (0°) to a wide angle fan spray (40°). See How To Use Wand instructions in this section.

Detergent injection system rinsing hose (not shown): Rinses the detergent injection system after use of cleaning solution.

Dual-detergent injection system: Depending on the cleaning task, switch from one cleaning solution to another by simply turning the detergent selection dial.

BASIC ELEMENTS OF AN ENGINE

Refer to the engine manual for location and operation of engine controls.

Choke control: Opens and closes carburetor choke valve.

Throttle control lever: Controls engine speed.

Starter grip: Pulling starter grip operates recoil starter to crank engine.

A08989 8- ENG