Lighting Systems A-6

1BHFPG

"MFSPOÜ4FSJFT-JHIU51FSh DN 4FDUJPO

6

2

4

1

3

9-9/16”

(24.29cm)

3-5/8” (9.21cm)

Module Ordering Information

12-3/8” (31.43cm)

 

NOT TO SCALE

 

 

 

Family

 

Series

A

 

1

Complete ordering instructions below.

Track

B

A = Track

B = No Track

Length

4= 4-Foot

8 = 8-Foot

12 = 12-Foot

Shielding

C

A = No Shield

B = Solid Shield

C = Perf Shield

D = Lens Shield

Lamps

28 = 28w

54 = 54w

Finish

WH = White AL = Aluminum

Options

E1 = Emergency Pack, 120v

E2 = Emergency Pack, 277v

D1 = Dimming 120v

D2 = Dimming 277v

X5 = 5 Through Wires

Features

1.Housing: Extruded aluminum housing in lengths of 4’ (121.92cm), 8’ (243.84cm) and 12’ (365.76cm). There are no exposed fasteners. The end caps are die-cast aluminum sculpted and finished to match the housing.

2.Lens: Extruded clear acrylic linear prismatic lens.

3.Reflector: Die-formed high purity anodized specular aluminum.

4.Lamping: One T5 28W or 54W lamp per four-foot nominal length. Provided by others.

5.Alignment Mechanism: The housing and the end cap each have a draw tight mechanism that creates a hairline joint along and at the ends of the run. To operate the mechanism, the installer tightens two screws.

6.Shielding: Die-formed 18 gauge perforated steel. Pattern has 0.117” (0.30cm) holes on 5/32” (0.40cm) centers and is 51% open. High reflectance white finish.

Labels

UL, cUL and I.B.E.W.

Finish

Powder coated baked white or silver enamel.

Custom colors available, consult factory.

Mountings

All mounting is on 48” (121.92cm), 96” (243.84cm) and 144” (365.76cm) centers. Cable Suspension (not shown) 4-1/2" (11.43cm) diameter flat canopy finished white enamel, 1/16" (0.16cm) diameter stainless steel aircraft cable adjustable up to 36" (91.44cm) and adjustable cable gripper. Cable mounting at the ends of a run is not available when track is being used. Installing stems at the ends of the run will prevent the fixture from hanging off center caused by the weight of the track fixture. Cable suspension can be used in the center of runs that have track installed. Consult factory for other options.

Stem Mounting (not shown) - 4-1/2" (11.43cm) diameter flat canopy, 1/4"

(0.64cm) IP (1/2” (1.27cm) OD) stem. The stem can accommodate up to 2-12 gauge and 3-18 gauge solid wires. All components have a white finish.

Electrical

Ballast is <10% THD, 1.0 ballast factor, program start. Color-coded quick connectors allow ease of connection for joiner modules. For special circuiting consult factory. Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circtuit off.

Dimming: 120/277 VAC 1% dimming level, 4 or 5 wire feed required.

Emergency Battery Pack: 28 watt: 520 lumens @ 90 minutes, 54 watt: 700 lumens @ 90 minutes.

Ordering Instructions

Individual Fixtures:

1.Order number of MODULES required.

2.Order one POWER FEED END SET per MODULE.

Continuous Rows:

1.Determine run length.

2.Order the appropriate number of MODULES for the complete run.

3.Order one POWER FEED END SET per run.

4.Order one INTERMEDIATE SUSPENSION per MODULE minus one per run.

5.For runs that exceed amperage limits, order the appropriate number of

INTERMEDIATE POWER FEEDS.

Job Information

Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

"JSQPSU3PBE'BMM3JWFS."t  t'BY  

We reserve the right to change details of design, materials and finish.

XXXMJHIUPMJFSDPN½1IJMJQT(SPVQt $

Page 1
Image 1
Lightolier A-6 manual 1BHFPG

A-6 specifications

The Lightolier A-6 is an innovative and versatile lighting solution recognized for its sleek design and advanced functionality. This surface-mounted fixture has found its place in both commercial and residential applications, offering a blend of style and efficiency that illuminates spaces effectively.

One of the standout features of the Lightolier A-6 is its exceptional energy efficiency. Utilizing LED technology, the fixture consumes significantly less power than traditional incandescent or fluorescent lighting while producing high-quality illumination. The A-6 is designed to provide a range of lumen outputs, making it suitable for various lighting needs—from accentuating artwork in galleries to providing general lighting in offices.

Another key characteristic of the A-6 is its customizable design. Available in a variety of finishes, sizes, and color temperatures, users can select options that best fit their aesthetic and functional requirements. This adaptability ensures compatibility with various interior décor, making the A-6 a popular choice among designers and homeowners alike.

The technology incorporated into the Lightolier A-6 enhances its user-friendliness. It features integrated dimming capabilities, allowing users to adjust brightness levels according to the ambiance and context of the space. This flexibility not only contributes to energy savings but also enhances comfort and mood, making it ideal for venues that require different lighting scenarios throughout the day.

Additionally, the A-6 is built with a robust housing that promotes durability and longevity. Its construction is designed to withstand varying environmental conditions, making it a reliable option for both interior and exterior installations. This durability ensures that the fixture maintains its performance and aesthetic appeal even after prolonged use.

Installation of the Lightolier A-6 is streamlined, with a straightforward mounting system that allows for quick setup. Its lightweight yet sturdy design means that it can be easily handled and installed by professionals and skilled DIY enthusiasts alike.

In summary, the Lightolier A-6 embodies the intersection of style, technology, and energy efficiency. Its ability to deliver customizable, high-quality lighting while remaining durable and user-friendly makes it a preferred choice in modern lighting solutions. Whether enhancing the ambience of a home or meeting the demanding needs of commercial spaces, the A-6 stands out as an exemplary fixture in the world of lighting design.